Installation Items
| Costco Kits | Artificial Grass | Installation Items | Infill Products |
Installation Items and Kits
Seaming Tape
Seaming tape 3.75″ x 15′.
Seaming tape instructions:
1. Cut turf remnants to shape and size forming a design of your choice.
2. Cut tape strips to the length of your design.
3. Expose adhesive by removing liner and join remnants, two pieces at a time on the center line of the tape.
4. Turn turf over carefully and tape all remaining seams.
5. Place carpet right side up and walk down all seams.
Seaming Glue Kit
1 Gallon Glue, 35 ft seaming fabric, and 1 trowel
Glue Kit Instructions:
1. Once you position the turf trim the edge of each piece of turf (with a razor knife or carpet cutter, found at Costco or any hardware store) so that they are very straight.
2. Once you have cut the edges of each roll straight, lay them adjacent to each other on the base in the desired position.
3.Make sure that the "tuft lines" or stitch lines of each roll match with each other.
4. If you make good straight cuts and match the tuft lines, your seams will be virtually invisible.
Landscape Fabric
Geo Textile Landscape fabric.
This product is sold by the square foot. Minimum order of 450 square feet is required in order for us to ship out to you.
Landscape fabric. $.43/sq ft (each piece will always be 15 feet wide)
Please enter your square footage needed in the quantity box. Reminder, minimum of 450 sq ft is required. Product comes in a width of 15 feet.
Landscape Spikes
Landscaping nails for turf installation.
Product is sold by the pound. There are approximately 28 nails per pound.
Updating...

